FloodSok Panel

/FloodSok Panel
  • floodsok1
  • bsi kitemark test
  • DSC_0329
  • BSI floodkit kitemark

FloodSok Panel

  • On-Line store coming soon please call 01562 310123 to discuss your requirements
  • Panels are available from £ 100.00 +vat
  • Each panel is supplied with 3 x unique FloodSoks, 2 x wedges, and 2 sachets of FloodPowder

Product Description

The FloodKit FloodSok panel is Kitemarked by BSI certificate no. KM 651934 to PAS1188-1 : 2014 for water ingress.

Easy to install just lay one of the unique FloodSoks onto your threshold, fill any voids with a sachet of our FloodPowder and place the panel ontop. Tap it into place with a hammer, place the wedges at the top of the panel and knock them into place to hold the panel, as shown in the pictures. Then just press the other two FloodSoks between the edges of the panel and your doorway. When the floodwater comes you will have a watertight seal.

All FloodKit Door panels are manufactured from the finest Scandinavian Birch plywood that is fully PEFC certified and overlaid with a durable weather resistant phenolic film. This super strong Panel will deflect less than 1mm over a 1metre length with half a ton of water bearing against it which equates to floodwater 900mm high. The Panels also feature EPDM rubber seals to ensure a watertight fit against your door frame.

FloodKit Panels have been independently tested at UClan to exceed the current PAS1188-1 : 2014 for water ingress.

Our standard panels are 600mm high and are available in a variety of standard widths to suit the most popular door frame sizes. Alternative widths and panels 900mm high to protect against extreme floods are also available.



There are no reviews yet.

Be the first to review “FloodSok Panel”